|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| Liang-Bi Chen, Ph.D. (陳良弼博士), IEEE Senior Member (美國電機電子工程師學會資深會員) | |
|
|
|
| Liang-Bi Chen (陳良弼) received the B.S. and M.S. degrees in electronic engineering from the National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan, in 2001 and 2003, respectively, and a Ph.D. degree in electronic engineering from Southern Taiwan University of Science and Technology, Tainan, Taiwan, in 2019. From 2004 to 2010, he was enrolled in computer science and engineering Ph.D. program at the National Sun Yat-Sen University, Kaohsiung, Taiwan. From August to September 2008, he had an internship with the Department of Computer Science, National University of Singapore, Singapore. He was also a Visiting Researcher with the Department of Computer Science, University of California, Irvine, CA, USA, from September 2008 to August 2009 and with the Department of Computer Science and Engineering, Waseda University, Tokyo, Japan, from July to August 2010. In May 2012, he joined BXB Electronics Co., Ltd., Kaohsiung, Taiwan, as an R&D Engineer. In May 2013, he was transferred to the position of Executive Assistant to the Vice President, which he held until September 2016. In October 2016, he joined Southern Taiwan University of Science and Technology, Tainan, Taiwan, as an Assistant Research Fellow and a part-time Assistant Professor. In August 2020, he joined the Department of Computer Science and Information Engineering, National Penghu University of Science and Technology (NPU), Penghu, Taiwan, as an Associate Professor and a Chair. His research interests include Internet of Things (IoT), Artificial Intelligence over Internet of Things (AIoT), VLSI design, power/performance analysis for embedded mobile applications and devices, power-aware embedded systems design, low-power systems design, digital audio signal processing, engineering education, project-based learning education, SoC/NoC verification, and system-level design space exploration. Since 2013, he has served as a Section Editor Leader, an Associate Editor, and a Guest Editor-in-Chief of the IEEE Technology and Engineering Education. Since 2019, Dr. Chen serves as an Associate Editor for the IEEE Access. He has also served as a TPC member, an IPC member, and a reviewer for many IEEE/ACM international conferences and journals. He was a recipient of the 2014 IEEE Education Society Student Leadership Award and 2019 Young Scholar Potential Elite Award of the National Central Library, Taiwan. He was also a recipient of the 2018 Publons Peer Review Award for Placing in the Top 1% of Reviewers in Engineering in the World. He received the First Prize Best Paper Award at IEEE ICASI ’17, the Honorable Mention Award at ICAAI ’16, the 1st Prize Excellent Demo! Award at IEEE GCCE ’16-18, and the 2nd Prize Excellent Poster Award at IEEE GCCE ’16. He received the 2021 Chester Sall Award (Best Paper Award of IEEE Transactions on Consumer Electronics), IEEE Consumer Technology Society. Since 2022, he has also been serving as a Chair of IoT Technical Committee (TC) at IEEE Consumer Technology Society. He is a senior member of IEEE and a member of the IEICE and the PMI. | |
|
|
|
|
publons: https://publons.com/researcher/1383443/liang-bi-chen/ ORCID: https://orcid.org/0000-0003-3181-4480 ResearchGate (RG): https://www.researchgate.net/profile/Liang-Bi_Chen |
|
|
|
|
|
Power/Performance Analysis for Embedded Mobile Applications and Devices Power-aware Embedded Systems Design Low Power Systems Design SoC/NoC Debugging/Verification Techniques Development Digital Audio Signal Processing Information and Communications Technology (ICT) Development Internet of Things (IoT)/Internet of Vehicles (IoV) Technology Development Artificial Intelligence over Internet of Things (AIoT) Applications Development Vehicle Electronics Engineering Education Project Management System Integration (SI) |
|
|
|
|
|
Ph.D., Dept. of Electronic Engineering, Southern Taiwan University of Science and Technology, Tainan, Taiwan, R.O.C., 09/2017 – 06/2019 Ph.D., Dept. of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan, R.O.C., 09/2004 - 10/2010 (ABD) M.S., Graduate Institute of Electronic and Information Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan, R.O.C. 09/2001 -06/2003 B.S., Dept. of Electronic Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan, R.O.C., 09/1999 - 06/2001 |
|
|
|
|
|
ACM Membership (USA), Since 2006~ ACM SIGDA Membership (USA), Since 2006~ IEEE Membership (USA), Since 2004~ IEEE Circuits and Systems Society Membership (USA), Since 2004 ~ IEEE Consumer Electronics Society Membership (USA), Since 2004 ~ IEEE Education Society Membership (USA), Since 2004 ~ IEEE Systems, Man, and Cybernetics Society Membership (USA), Since 2012 ~ IEEE Communications Society Membership (USA), Since 2013 ~ IEEE Vehicular Technology Society Membership (USA), Since 2017~ IEICE Membership (JAPAN), Since 2009 ~ Project Management Institute (PMI) Membership (USA), Since 2015~ |
|
|
|
|
|
Honors Elevation
Listed in Who’s Who
Scholarships & Grants 2023 Travel Grant for IEEE ICCCI 2023 (Fujisawa, Japan), National Science and Technology Council (NSTC), Taiwan, R.O.C. 2022 Travel Grant for IEEE GCCE 2022 (Osaka, Japan), National Science and Technology Council (NSTC), Taiwan, R.O.C. 2021 Travel Grant for IEEE ICCE-TW 2021 (Penghu, Taiwan), MDPI, Basel, Switzerland. 2019 Travel Grant for IEEE ICCE 2019 (Las Vegas, NV, USA), Ministry of Science and Technology (MOST), Taiwan, R.O.C. 2018 Travel Grant for IEEE ICASI 2018 (Chiba, Japan), Ministry of Science and Technology (MOST), Taiwan, R.O.C. 2018 Travel Grant for IEEE ICCE 2018 (Las Vegas, NV, USA), Ministry of Science and Technology (MOST), Taiwan, R.O.C. 2017 Travel Grant for IEEE GCCE 2017 (Nagoya, JAPAN), Ministry of Science and Technology (MOST), Taiwan, R.O.C. 2016 Travel Grant for IEEE ICCE 2016 (Las Vegas, NV, USA), Ministry of Science and Technology (MOST), Taiwan, R.O.C. 2010 Awarded the Taiwan/Japan Grant (including Taiwan/Japan round-trip ticket, JPY$560,000 (about US$6,550) for Japan Living Allowance (JPY$10,000 per day), JPY$60,000 for Japan Research Travel Grant, JPY$100,000 for Research Support Allowance, and a Japan life Insurance) for 2010 Japan-Taiwan PhD Summer Program. To pursue advanced research in the Togawa Lab, Dept. Computer Science and Engineering at Waseda University, Shinjuku, Tokyo, JAPAN. (99年國科會與日本交流協會合作辦理補助博士生暑期赴日研究計畫─日本早稻田大學大學院基幹理工學研究科情報理工學專攻戶川研究室). 2010 Graduate Student Travel Grant for ACM/EDAC/IEEE DAC 2010 (Anaheim, CA, USA), National Science Council (NSC), Taiwan, R.O.C. 2009 Graduate Student Travel Grant for IEEE ISOCC 2009 (Busan, Korea), National Science Council (NSC), Taiwan, R.O.C. 2009 DAC 2009 Student Travel Grant for ACM/SIGDA University Booth, ACM, USA. 2009 Student Oral Paper Presentation Scholarship (Student as First Author) for IEEE/ACM ASP-DAC 2009 (Yokohama, Japan), Taiwan IC Design Society, Taiwan, R.O.C. 2008 Awarded a NT$400,000 (about US$12,000) grant for 8 months (01/2009~08/2009) to pursue advanced research in the Department of Computer Science, University of California at Irvine, Irvine, CA, USA. Graduate Students Study Abroad Program (GSSAP) (97年國科會千里馬計畫─美國加州大學爾灣分校電腦科學系高等嵌入式電腦研究中心) sponsored by National Science Council (NSC), Taiwan, R.O.C. 2008 Awarded a NT$200,000 (about US$8,000) grant for 4 months (09/2008~12/2009) to pursue advanced research in the Department of Computer Science, University of California at Irvine, Irvine, CA, USA., International Cooperation Scholarship Program (97年國科會雙邊國際合作計畫獎助) sponsored by National Science Council (NSC), Taiwan, R.O.C. 2008 Honorarium for Invited paper presenter, sponsored by IEEK and IEEE ISOCC2008 (Busan, Korea). 2008 Student Oral Paper Presentation Scholarship (Student as First Author) for IEEE ISOCC2008 (Busan, Korea), IEEE Tainan Section, Taiwan, R.O.C. 2008 Internship Allowance SG$1500 (About US$1,055) for 1 month (08/2008~09/2008), Department of Computer Science, School of Computing, at National University of Singapore, Singapore, sponsored by Singapore MOE NUS ARF Grants (R-252-000-312-112). (97年國科會國際合作計畫暨新加坡國立大學ARF學術實習研究補助─新加坡國立大學計算學院電腦科學系嵌入式系統實驗室) 2008 Graduate Student Travel Grant for IEEE IIH-MSP 2008 (Harbin, China), National Science Council (NSC), Taiwan, R.O.C. 2008 Graduate Student Travel Grant for IEEE/ACM ASP-DAC 2008 (Seoul, Korea), National Science Council (NSC), Taiwan, R.O.C. 2008 Student Oral Paper Presentation Scholarship (Student as First Author) for IEEE/ACM ASP-DAC 2008 (Seoul, Korea), Taiwan IC Design Society, Taiwan, R.O.C. 2008 Student Oral Paper Presentation Scholarship (Student as First Author) for IEEE/ACM ASP-DAC 2008 (Seoul, Korea), IEEE Tainan Section Taiwan, R.O.C. 2007 DAC 2007 Student Travel Grant for ACM/SIGDA University Booth, ACM, USA. 2007 Research Scholarship, Springsoft Education Foundation, Taiwan, R.O.C. 2007 PhD Student Travel Grant for IEEE/ACM DATE 2007 (Nice, France), Ministry of Education, Taiwan, R.O.C. 2006 PhD Student Travel Grant for IEEE APCCAS 2006 (Singapore), Ministry of Education, Taiwan, R.O.C. 2006 Student Oral Paper Presentation Scholarship (Student as First Author) for IIIS EISTA 2006 (Orlando, FL, USA), Taiwan IC Design Society, Taiwan, R.O.C. 2006 PhD Student Travel Grant for ACM/IEEE DAC 2006 (San Francisco, CA, USA), Ministry of Education, Taiwan, R.O.C.
Awards International Awards 2024 Outstanding Organization Award, 2024 6th International Conference on Computer Communication and the Internet (ICCCI), Tokyo, Japan. 2023 3rd Place Best Paper Award of IEEE Transactions on Consumer Electronics, 2021 Chester Sall Award, IEEE Consumer Technology Society (CTSoc), These set of awards are to recognize the best papers published in the IEEE Transactions on Consumer Electronics. A 1st place, 2nd place, and 3rd place Best Paper Award is given and presented at the next ICCE. The Award consists of a plaque and a financial award. 2022 2021 Outstanding Associate Editor Award, IEEE Access Journal. The criteria for becoming an Outstanding Associate Editor is to be among the Top 3% of IEEE Access Associate Editors based on the number of articles handled throughout the year in a thorough and rigorous manner, as well as being active and in good standing with the IEEE and IEEE Access. 2021 2020 Outstanding Associate Editor Award, IEEE Access Journal. The criteria for becoming an Outstanding Associate Editor is to be among the Top 3% of IEEE Access Associate Editors based on the number of articles handled throughout the year in a thorough and rigorous manner, as well as being active and in good standing with the IEEE and IEEE Access. 2021 Publons Excellent Reviewer Award for performing the most verified pre-publication peer reviews rated as ‘excellent’ by academic journal editors on Publons 2020 IEEE LifeTech 2020 Outstanding Paper Award, 2020 IEEE 2nd Global Conference on Life Sciences and Technologies (LifeTech 2020), Kyoto, Japan 2019 Gold Medal Award, 2019 Kaohsiung International Invention & Design Expo, Kaohsiung, Taiwan 2019 Silver Medal Award, 2019 Taiwan Innotech Expo Invention Contest, Taipei, Taiwan. 2019 Publons Peer Review Award 2019 for Placing in the Top 1% of Reviewers in Engineering in the world. 2019 Publons Peer Review Award 2019 for Placing in the Top 1% of Reviewers in Cross-Field in the world. 2018 1st Prize, IEEE GCCE 2018 Excellent Demo! Award, 2018 IEEE 7th Global Conference on Consumer Electronics, Nara, Japan. 2018 2nd Prize, Best Oral Paper Award, 2018 International Symposium on Novel and Sustainable Technology (ISNST), Tainan, Taiwan 2018 Silver Medal Award, 2018 Taiwan Innotech Expo Invention Contest, Taipei, Taiwan. 2018 Publons Peer Review Award 2018 for Placing in the Top 1% of Reviewers in Engineering in the world. 2018 Outstanding Reviewer Award, the Editors of Microprocessors and Microsystems, Elsevier, Amsterdam, the Netherlands. 2018 The 2018 Albert Nelson Marquis Lifetime Achievement Award, Marquis Who’s Who, NJ, USA. 2017 1st Prize, IEEE GCCE 2017 Excellent Demo! Award, 2017 IEEE 6th Global Conference on Consumer Electronics, Nagoya, Japan. 2017 1st Prize, Best Paper Award, 2017 IEEE International Conference on Applied System Innovation, Sapporo, Japan. 2017 The 2017 Albert Nelson Marquis Lifetime Achievement Award, Marquis Who’s Who, NJ, USA. 2016 1st Prize, IEEE GCCE 2016 Excellent Demo! Award, 2016 IEEE 5th Global Conference on Consumer Electronics, Kyoto, Japan. 2016 2nd Prize, IEEE GCCE 2016 Excellent Poster Award, 2016 IEEE 5th Global Conference on Consumer Electronics, Kyoto, Japan. 2016 The Honorable Mention Award, IIAI 5th International Congress on Advanced Applied Informatics (AAI’16), Kumamoto, Japan. 2014 IEEE Student Leadership Award, IEEE Education Society, USA. (Awarded US$500 stipend; plaque and certificate; paid registration to the IEEE/ASEE 2014 Frontiers in Education (FIE) Conference, Madrid, Spain) 2009 2nd Prize, Xilinx Award, Chip Design Contest, 2009 IEEE International SoC Design Conference, Busan, Korea. (Awarded Commercial Price US$4,000 Xilinx Tool & XUP Development Board)
Special Awards 2020 Global Achievers Award, Indian Institute of Oriental Heritage, Kolkata, India 2015 S.M. Cho IT Student Leader Award, Institute of Information & Computing Machinery (IICM), Taiwan, R.O.C. 2013 Achievement Award, Dale Carnegie Training, Kaohsiung, Taiwan, R.O.C.
National Awards 2024 Honorable Mention, 2024 AMD Design Contest, Taiwan, R.O.C. (Team Advisor) 2024 Honorable Mention, SoC Application for Smart Environment, 2024 Intelligent SoC Innovative Project Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2024 Honorable Mention, Software and Embedded Platform Applications Division, 18th Digital Signal Processing (DSP) Creative Design Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2023 Honorable Mention, 2023 AMD Design Contest, Taiwan, R.O.C. (Team Advisor) 2023 Honorable Mention, Internet of Things (IoT) Division, 2023 Intelligent Innovation and Interdisciplinary Creation Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2023 Honorable Mention, TEMI IoT Applications Division, 18th Digital Signal Processing (DSP) Creative Design Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2022 Honorable Mention, Internet of Things (IoT) Division, 2022 Intelligent Innovation and Interdisciplinary Creation Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2022 Honorable Mention, SoC Application for Smart Environment, 2022 Intelligent SoC Innovative Project Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2022 Honorable Mention, AI DSP Applications Division, 16th Digital Signal Processing (DSP) Creative Design Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2022 Honorable Mention, Green Energy and Control Applications Division, 16th Digital Signal Processing (DSP) Creative Design Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2021 3rd Prize, TEMI IoT Applications Division, 16th Digital Signal Processing (DSP) Creative Design Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2019 Young Scholar Potential Elite Award, National Central Library, Taiwan, R.O.C. 2018 3rd Prize & Honorable Mention, System Integration Implementation, Get Fresh! Contest (經濟部工業局搶先大賽), Industrial Development Bureau, Ministry of Economic Affairs, Taiwan, R.O.C. (Team Advisor). 2018 1st Prize, Healthcare Division, 13th Digital Signal Processing (DSP) Creative Design Contest, Ministry of Education (MoE), Taiwan, R.O.C. (Team Advisor) 2017 Enterprise Award (PAPAGO), Smart City Applications, 2017 Communications Competition, Industrial Development Bureau, Ministry of Economic Affairs, Taiwan, R.O.C. (Team Advisor). 2017 Honorable Mention, Smart City Applications, 2017 Communications Competition, Industrial Development Bureau, Ministry of Economic Affairs, Taiwan, R.O.C. (Team Advisor). 2014 1st Prize, Direction Award of Senior High School Students, 2014 National High School Students’ Leisure & Health Activities Design Competition, Chia Nan University of Pharmacy & Science, Tainan, Taiwan, R.O.C. 2014 Honorable Mention, Direction Award of Senior High School Students, Mobile Apps Division, National Innovative Electronic Design Contest, National Kaohsiung University of Applied Sciences, Taiwan, R.O.C. 2014 Taiwan Excellence Award for BXB C901 Conference Camera Image Processor product, Bureau of Foreign Trade of Ministry of Economic Affairs, Taiwan, R.O.C. 2013 Outstanding Achievement Award for Executing Kaohsiung SBIR Project (Oct. 2012-Sep. 2013, Proposal No. SBIR10160), Kaohsiung City Government, Taiwan, R.O.C. 2013 Honorable Mention, Direction award of National High School Student Paper Contest, Taiwan, R.O.C. 2013 Potential Award, University Patent Analysis & Portfolio Contest, Department of Industrial Technology (DoIT), Ministry of Economic Affairs (MOEA), Taiwan, R.O.C. 2013 Taiwan Excellence Award for BXB UFO 2000 series products, Bureau of Foreign Trade of Ministry of Economic Affairs, Taiwan, R.O.C. 2013 Taiwan Excellence Award for BXB FCS 3025/3026 series products, Bureau of Foreign Trade of Ministry of Economic Affairs, Taiwan, R.O.C. 2010 1st Prize, National Innovative Electronic Design Contest, National Kaohsiung University of Applied Sciences, Taiwan, R.O.C. 2010 Honorable Mention, National Innovative Electronic Design Contest, National Kaohsiung University of Applied Sciences, Taiwan, R.O.C. 2009 Honorable Mention, Direction award of National High School Student Paper Contest, Taiwan, R.O.C. 2008 Honorable Mention, National Innovative Electronic Design Contest, National Kaohsiung University of Applied Sciences, Taiwan, R.O.C. 2007 Honorable Mention, 7th Semiconductor Design and Application Competition, Macronix Golden Silicon Award, Taiwan, R.O.C. 2007 1st Prize, Direction award of National High School Student Paper Contest, Taiwan, R.O.C. 2007 2nd Prize, Direction award of National High School Student Paper Contest, Taiwan, R.O.C. 2005 2nd Prize, The 2005 Contest on Embedded Software Design Contest of Multimedia, Ministry of Education, Taiwan, R.O.C. 2004 Honorable Mention, National Innovative Electronic Design Contest, National Kaohsiung University of Applied Sciences, Taiwan, R.O.C. 2004 2nd Prize, Technical Teaching Plan Contest, Ministry of Education, Taiwan, R.O.C. 2002 3rd Prize, FPGA Verification of Soft IP Contest, Ministry of Education, Taiwan, R.O.C. 2001 Golden Technical Award, Dept. Electronic Engineering, National Kaohsiung University of Applied Sciences, Taiwan, R.O.C. 1999 2nd Prize, FPGA Verification of Soft IP Contest, Ministry of Education, Taiwan, R.O.C. 1999 2nd Prize, Soft IP Contest, Ministry of Education, Taiwan, R.O.C. 1999 Honorable Mention, IC-CAD Contest, Ministry of Education, Taiwan, R.O.C. 1998 2nd Prize, Consumer Electronics, Taiwan Province Skills Competition, Taiwan, R.O.C. 1997 2nd Prize, Industrial Electronics, National Skills Competition, Taiwan, R.O.C. 1996 Honorable Mention, Consumer Electronics, Engineering Student Skills Competition, Ministry of Education, Taiwan, R.O.C. School Awards 2024 Excellence Award, Presentation of Innovative Teaching Achievements, Higher Education Sprout Project, Ministry of Education (MoE), National Penghu University of Science and Technology, Penghu, Taiwan. 2023 Teaching Excellence Award, College of Marine Resources and Engineering, National Penghu University of Science and Technology, Penghu, Taiwan. 2022 Teaching Excellence Award, College of Marine Resources and Engineering, National Penghu University of Science and Technology, Penghu, Taiwan. 2022 Teaching Innovation and Improvement Award, National Penghu University of Science and Technology, Penghu, Taiwan. 2021 Teaching Innovation and Improvement Award, College of Marine Resources and Engineering, National Penghu University of Science and Technology, Penghu, Taiwan. |
|
|
|
|
|
Strong experiences in Project Management such as NSC/MOST National/General Proposal (Taiwan), MoE Proposal (Taiwan), and SBIR Proposal (Taiwan). Strong experiences in Project-based Learning (PBL) Education for K-12, undergraduate, and graduate students. Strong experiences in HDL language such as Verilog. Strong experiences in FPGA prototyping verification. Strong experiences in board-level circuit design including analog and digital circuit. Good experiences in programming languages such as C/C++. Good knowledges of electronics, VLSI design, embedded systems, computer architecture, K-12 education, and low power design. |
|
|
|
|
|
Associate Professor & Chair, 08/2024~now Department of Computer Science and Information Engineering, National Penghu University of Science and Technology (NPU), Penghu, Taiwan Teaching for Introduction to Design and Implementation of Internet of Things, Digital Logic Design, and Special Practical Projects. Graduate Institute of Electrical Engineering and Computer Science, National Penghu University of Science and Technology, Penghu, Taiwan Associate Professor, 02/2024~07/2024 Department of Computer Science and Information Engineering, National Penghu University of Science and Technology (NPU), Penghu, Taiwan Teaching for Introduction to Design and Implementation of Internet of Things, Digital Logic Design, and Special Practical Projects. Graduate Institute of Electrical Engineering and Computer Science, National Penghu University of Science and Technology, Penghu, Taiwan Assistant Professor, 08/2020~01/2024 Department of Computer Science and Information Engineering, National Penghu University of Science and Technology (NPU), Penghu, Taiwan Teaching for Introduction to Computer Science, Data Structure, Deep Learning, Network Programing, Introduction to Internet of Things, Design and Implementation of Internet of Things, Digital Logic Design, Digital Logic Design Practice, Special Practical Projects, Smart Life & Sensors Network, Microprocessor, and Digital Electronics. Graduate Institute of Electrical Engineering and Computer Science, National Penghu University of Science and Technology, Penghu, Taiwan Teaching for Application and Research of Internet of Things (IoT) Department of Communication Engineering, National Penghu University of Science and Technology (NPU), Penghu, Taiwan Teaching for Electronics (I). Director, 08/2021~07/2024 Curriculum Division, Office of Academic Affairs, National Penghu University of Science and Technology (NPU), Penghu, Taiwan Lab Head, 02/2021~now Intelligent Computing and Systems Lab. (ICSL), Department of Computer Science and Information Engineering, National Penghu University of Science and Technology (NPU), Penghu, Taiwan Special Assistant to Dean of Collage, 08/2020~01/2021 Collage of Marine Resource and Engineering, National Penghu University of Science and Technology (NPU), Penghu, Taiwan External Expert, 11/2021~now The National Centre for Research and Development (NCBR) - A government agency financing scientific research projects in Poland. The NCBR is the biggest funding agency in Central and Eastern Europe, our average annual budget is over 1,3 billion EUR. NCBR appoint external experts to assist in the evaluation of grant applications, projects, and to provide opinions and advice in specific cases. Assistant Research Fellow, 05/2020~07/2020 AIoT Innovation Technology and Experience Design Center (AIoT Center), Southern Taiwan University of Science and Technology, Tainan, Taiwan Research Manager, 10/2017~07/2020 Artificial Intelligence over Internet of Things Applied Research Center (AIoT Center), Southern Taiwan University of Science and Technology, Tainan, Taiwan Senior Technical Manager, 10/2016~07/2020 IoT Lab, Dept. of Electronic Engineering, Southern Taiwan University of Science and Technology, Tainan, Taiwan Project Manager, 10/2016~07/2017 Dept. of Electronic Engineering, Southern Taiwan University of Science and Technology, Tainan, Taiwan Faculty Advisor, 03/2017~06/2017 A Taiwan Representative Team to attend the BMEidea 2017 Competition, which was held by VentureWell, formerly known as the National Collegiate Inventors and Innovators Alliance (NCIIA), USA. Project Management Executive, 05/2016~09/2016 Dept. of Administration, BXB Electronics Co., Ltd., Kaohsiung, Taiwan Managing Director, 10/2014~now Universe Construction Co., Ltd., Kaohsiung, Taiwan Industry Teacher, 11/2013~12/2013 Dept. of Information Engineering, Kun Shan University, Tainan, Taiwan Executive Assistant to Vice-President, 05/2013~04/2016 Vice-President Office, BXB Electronics Co., Ltd., Kaohsiung, Taiwan Research & Development Engineer and System Engineer, 05/2012-04/2013 Section II, Dept. of Research & Development, BXB Electronics Co., Ltd., Kaohsiung, Taiwan Member of Computer Emergency Response Team (CERT) & Defense Computer Server Manager 09/2011-05/2012 The 8th Army Corps, Republic of China Army. (Mandatory Military Service in Taiwan) Visiting Ph.D. Student 07/2010-08/2010 Togawa Lab, Dept. of Computer Science and Engineering, Waseda University, Shinjuku, Tokyo, JAPAN. Supervisor: Dr. Nozomu Togawa & Dr. Youhua Shi Visiting Scholar 09/2008-08/2009 Center for Embedded Computer Systems (CECS), Dept. of Computer Science, University of California at Irvine, Irvine, CA, USA. Supervisor: Dr. Nikil Dutt (IEEE Fellow & ACM Fellow) Internship 08/2008 – 09/2008 Embedded Systems Research Lab., Dept. of Computer Science, National University of Singapore, Singapore Supervisor: Dr. Samarjit Chakraborty (Since 2009, he joined TU Munich, Germany, as a Professor) Adjunct Assistant Professor 02/2020 – 07/2020 Department of Electronic Engineering, Southern Taiwan University of Science and Technology, Tainan, Taiwan Teaching for Design and Application of Intelligent IoT Devices. Adjunct Lecturer 02/2019 – 07/2020 Department of Innovation and Design Engineering, National Kaohsiung University of Science and Technology, Diyi Campus, Kaohsiung, Taiwan Teaching for Mobile Devices App Design. Adjunct Lecturer 09/2018 – 07/2020 Department of Electronic Engineering, National Kaohsiung University of Science and Technology, Diyi Campus, Kaohsiung, Taiwan Teaching for Computer Organization and Program Language. Adjunct Lecturer 09/2017 – 01/2020 Department of Electronic Engineering, Southern Taiwan University of Science and Technology, Tainan, Taiwan Teaching for Physics, Electric Circuits, Electronics, and Introduction to Internet of Things (IoT). Adjunct Lecturer 02/2013 – 07/2020 Department of Information Management & Department of Business Administration, National Taichung University of Science and Technology, Kaohsiung Campus, Taiwan Teaching for Management Information System, System Design & Analysis, Networking Marketing, Package Software, and Visual Basic Programming. Adjunct Lecturer 09/2009 – 01/2010 Office of Library and Information Services, National Sun Yat-Sen University, Kaohsiung, Taiwan Teaching for Making of Digital Materials and Computer Science. Adjunct Lecturer 09/2010 – 02/2011 Department of Computer Simulation and Design, Shin-Chien University, Kaohsiung, Taiwan Teaching for Database System Management. Adjunct Lecturer 09/2010 – 02/2011 Department of Computer Science and Information Engineering, National Pingtung Institute of Commerce, Pingtung, Taiwan Teaching for Windows-based Programming and Homepage Design. Adjunct Lecturer 02/2010 – 07/2010 Department of Information Management, National Pingtung University of Technology and Science, Pingtung, Taiwan Teaching for Introduction to Computer Science. Adjunct Lecturer 09/2009 – 2011/06 Department of Computer Science and Information Engineering, Tajen University, Pingtung, Taiwan Teaching for Computer C/C++ Programming and System Programming, and Concepts of Embedded Systems. Adjunct Lecturer 09/2007 - 06/2008 Department of Computer Science and Information Engineering, Tajen University, Pingtung, Taiwan Teaching for Operating System, Linear System, Digital Logic Design Fundamentals and Verilog HDL. Adjunct Lecturer 02/2005/ - 06/2005 Department of Information Technology, Meiho Institute of Technology, Pingtung, Taiwan Teaching for Object Oriented Programming. Adjunct Teacher 09/2013/ - now Department of Information Science, Kaohsiung Municipal Chung-Cheng Industrial High School, Kaohsiung, Taiwan Teaching for Digital Logic Practice. Adjunct Teacher 08/2009/ - now Department of Computer, Kaohsiung Municipal Kaohsiung Commercial High School, Kaohsiung, Taiwan Teaching for Making of Project, Making of Document, Computer Graphics and Image Processing, Internet Applications, Digital Data Processing, Digital Image Processing, Computer Software Application, and Package Software. Adjunct Teacher 02/2005/ - 07/2008 Department of Computer, Kaohsiung Municipal Kaohsiung Commercial High School, Kaohsiung, Taiwan Teaching for Computer Concept, Homepage Design, Database management, information application, programming language, and Computer network. Adjunct Teacher 09/2004 – 07/2007 Department of Electronic Engineering, Kaohsiung Municipal Kaohsiung Industrial High School, Kaohsiung, Taiwan Teaching for Electronics, Digital Electronics, Electronic Instrumentations, Television Theory, Practice Methodologies, Industrial electronic circuits design, Sensor Theory. Student Teacher 07/2003 – 07/2004, Department of Electronic Engineering, Kaohsiung Municipal Kaohsiung Industrial High School, Kaohsiung, Taiwan Research Assistant 11/2010-06/2011 EDA and Testing Lab., Department of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan Adjunct Research Assistant 09/2004-06/2010 Embedded Systems Lab., Department of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan Teaching Assistant 09/2009 -02/2010 Department of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan Tutor for Computer Organization. Teaching Assistant 02/2007 -06/2007 Department of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan Tutor for Advanced Embedded Systems Techniques and Principle and Implementation of Embedded Systems. Teaching Assistant 09/2006 -01/2007 Department of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan Tutor for Computer Organization. Teaching Assistant 02/2006 -06/2007 Department of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan Tutor for Principle and Implementation of Embedded Systems. Teaching Assistant 09/2005 -01/2006 Department of Computer Science and Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan Tutor for Computer Organization. Teaching Assistant 09/2004 -06/2005 General Knowledge Courses, National Sun Yat-Sen University, Kaohsiung, Taiwan Tutor for Bible & Western Culture, Bible & Human Life. Teaching Assistant 09/2001 -06/2003 Department of Electronic and Graduate Institute of Electronic & Information Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan Tutor for VLSI Design, Verilog HDL, Cell-based IC Design, VLSI Physical Synthesis and Design. Network Manager 09/2001 -06/2003 Department of Electronic and Graduate Institute of Electronic & Information Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan
|
|
|
|
|
|
A Research on Intelligent Greenhouse Orchid Monitoring and Production Line Automatic Packaging Classification System (Principal Investigator (PI), NSTC funded: NSTC 112-2622-E-346-002-MY2) 08/2023-07/2025, National Penghu University of Science and Technology, Magong, Penghu, Taiwan. Orchid is one of the essential industries in Taiwan’s agricultural trade. To help Taiwan’s orchid industry upgrade, we hope to support Taiwan’s orchid industry by introducing AIoT system technology into smart orchid greenhouses and automatic production line classification supply chains. The automatic cultivation of orchids and the practical cultivation of hundreds of orchid species, monitoring their growth, and the construction of an automatic orchid production line classification supply chain have become the main research focus of this proposal. This proposal plans to complete the research on intelligent greenhouse orchid monitoring and production line automatic packaging classification systems in 2 years. In the first year, the development and implementation of the greenhouse orchid monitoring system based on AIoT technology is expected to be completed. It is expected that an automated packaging classification system for production lines based on deep learning technology will be researched and developed in the 2nd year. The first-year plan system’s overall design is aimed at intelligently planting orchids. We will use various sensors for environmental data information to identify the growth status and send the identification information back to the cloud monitoring platform for the convenience of managers. The growth status is monitored and expected to be imported based on the deep learning model to predict and control the greenhouse environment information. Today's orchid production chain has the problem of tedious and time-consuming production, and automatic control technology can solve this problem. Automatic control technology solves the tedious and time-consuming steps of orchids on the production line. The key is to classify orchid species in real time. Advanced computer vision systems and automatic classification equipment have significant efficiency in orchid production lines. Nevertheless, the current orchid production automation method is not widely used, and the orchid production automation method has no practical method in the production line field. Therefore, in the second year of this proposal, we will study the basis of the orchid classification model architecture for production line automation packaging based on deep learning technology and carry out optimization actions to improve the performance of orchid export production line automation installation Research and Implementation of an Artificial Intelligence Edge Computing-Based Intelligent Handwriting and Painting Teaching System (Principal Investigator (PI), NSTC funded: NSTC 111-2622-E-346-001) 11/2022-10/2023, National Penghu University of Science and Technology, Magong, Penghu, Taiwan. This industry-university cooperation project intends to develop a handwriting and painting teaching system based on AI edge computing technology, which is different from traditional classroom handwriting and painting teaching and can produce impressive visual effects in visual media, including animation, graphics, text, etc. This project is based on the mode of industry-university cooperation, focusing on the education of elementary school children for development. It combines gesture tracking, gesture recognition, and other related artificial intelligence technologies and implements it on the AI edge computing development platform. The overall operation process only needs to move with bare hands. For handwriting and drawing teaching and practice, it consists of a teacher-side teaching host and several student-side AI edge computing smart devices. The student-side AI edge computing smart device performs virtual painting and writing, finger number operation teaching, virtual keyboard, virtual mouse, and anti-sleep warning. The teacher-side teaching host allows teachers to conduct course teaching as a teacher. The teacher-side teaching host and the student's smart device can simultaneously display images on a large screen to facilitate teaching display. This project focuses on the smart classrooms used in the environment of elementary school children and develops handwriting and drawing teaching systems based on AI edge computing technology. This system can draw and write virtually, recognize the user's gestures, and select colors to draw graphics, and teachers do not need to. The chalk is not limited to the front of the podium. It can be freely moved to any seat in the classroom for teaching. It is not only convenient to pay attention to the students' learning status but also does not need to clean the blackboard frequently, which significantly improves the teaching efficiency of teachers. Students do not need to operate the screen at close range and avoid bowing their heads. Family, and solve the situation of stealing games in class. Therefore, this project intends to cooperate with relevant elementary school institutions in Penghu to conduct field measurements, that is, to build the system in the classrooms of suitable elementary schools in Penghu to realize an intelligent classroom environment. In addition to academic research and development, the most critical aspect of this project is the follow-up industrial benefits. The project results will give rise to more industry-university cooperation and technology transfer projects. In addition, a complete data storage cloud platform is built, which can record the uploaded data of each student on the data storage cloud platform to facilitate teaching teachers to conduct relevant teaching evaluations. The promotion of this plan not only assists cooperative enterprises in improving AI R&D capabilities and talent cultivation but also hopes to become a benchmark case for applying artificial intelligence technology in our country's education field. Towards International Commercial Port Digitalization: An Intention Research for Adopting the AIoT and Blockchain-Based Technologies (Co-Principal Investigator (Co-PI), MoST funded: MOST 111-2410-H-346-003) 8/2022-7/2023, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan. With the rapid evolution of information and communication technology and outbreak of the Industry 4.0 revolution, the world has entered a new era of digital shipping. International commercial ports are the country’s economic gateway. Under the framework of digitalization, our country has also commenced to develop smart port in order to maintain long-term competitive advantages. This project is based on the technology acceptance model (TAM), and the structural equation modeling is employed to relationship between the valuables. In the first year, the port operators’ acceptance and intention to use the AIoT (Artificial Intelligence and Internet of Things) will be examined to understand the investment willingness and technical structure of the current industry players. In the second year, this project is to expand the investigation of the entire port supply chain industry to find out the crux of the problems that after their use of the blockchain, as well as the level of trust and willingness. This assist to understand whether the blockchain platform can effectively solve the problem, so as the payment flow and information flow of port logistics more efficient. The results of this project will be provided to the government, container terminal operators, and port supply chain operators for discussed, giving the way for new competitive advantage. Research for a Smart Agricultural Robotic System for Use in Pitaya Harvesting based on AI Edge Computing Technology (Principal Investigator (PI), MoST funded: MOST 110-2222-E-346-001) 8/2021-7/2022, National Penghu University of Science and Technology, Magong, Penghu, Taiwan. Many advanced countries in the world are facing the aging problem of the agricultural labor population. To cope with the shortage of agriculture manpower, many countries in the world including Taiwan have proceeded with the development of robots. Due to Taiwan's low birth rate, the shortage of agriculture manpower resulting from the aging agricultural labor population is even more severe than other countries. Particularly, in Taiwan's offshore lands, the population loss, community declining, weakening of the community functions, as well as the population aging are more server than Taiwan island. According to the statistics from Agriculture and Fisheries Penghu County Government, the abandoned field in Penghu county occupies an area of up to 5,521 hectares, which is 85% of the total agricultural land and 43% of the recorded total area of Penghu. This leads to a significant waste of the land resource. Penghu's epipedon is shallow and has a low water holding capacity, and that the growing environment is arid, Penghu suffers from not only drought damage caused by the lack of raining, but also wind damage under the strong wind as well as salt damage. In this regard, pitaya is a claiming cactus which is a member of the plant family Cactaceae and is a species of Hylocereus. Pitaya is tolerant of drought, heat, salt, fog and strong wind. In addition, since pitaya is easy to take care of, does not suffer from too many pests or diseases, and has a low usage of pesticide and a low production cost, pitaya can grow under the minimum amount of soil and water. Therefore, pitaya is a high-potential crop which is particularly suitable to be cultivated in Penghu and can be promoted. In light of this, it is the objective of this project to help Penghu's pitaya farmers, a local fruit of Penghu. It is known that most of the farmers in Penghu are aging and they would need automated equipment for harvesting purposes to thereby reduce the manpower required. To overcome the manpower shortage for Penghu’s pitaya farmers, we are planning on conducting a research project in regard to artificially-intelligent robots for automatic harvesting purposes of the pitaya fruit. In light of this, based on the combination of AI and IoT technologies, we have proposed a project entitled “Research for a smart agricultural robotic system for use in pitaya harvesting based on AI edge computing technology." The framework of the present project mainly includes (1) a robotic arm subsystem for pitaya harvesting based on computer vision, (2) an AGV based on computer vision, and (3) a visualized monitoring subsystem for pitaya harvesting. The present project establishes a system for an Artificial AIoT fruit harvesting robot applicable to smart farming by integrating the automated guided vehicle with computer vision. The fruit harvesting robot is based on the combination of IoT technology, AI edge computing technology, automated guided vehicle, and computer-visualized robot, and can be used in future academic research and development. A Research of a Framework to Security-Enabled and AIoT-Based System for Intelligent Aquaculture (Principal Investigator (PI), MoST funded: MOST 109-2222-E-346-001) 11/2020-10/2021, National Penghu University of Science and Technology, Magong, Penghu, Taiwan. Due to the increasing global population nowadays, the demand for foods has become higher and higher. People will encounter a shortage of food supply. Therefore, the food crisis is one of the issues of concern in the world. Since aquatic products are an important source of high-quality protein, aquaculture has been widely recognized as a solution to the global food crisis. Since the modern aquaculture industry suffers from the problems of extreme climate, population aging, labor shortage, high production cost, and unstable production rate, the above problems will lead to the bottleneck of the aquaculture industry under the population aging and climate change as the aquaculture industry is labor-intensive and highly relies on the worker’s experiences. This reflects that the domestic aquaculture industry is in urgent need of industrial upgrading. In recent years, countries worldwide have utilized artificial intelligence to overcome the problems that the aquaculture industry has faced. In other words, the Internet of things (IoT) technology has been applied to the aquaculture industry to establish an intelligent aquaculture system based on the IoT or AIoT system. When the IoT system is used in the aquaculture industry, it brings up information security as it will likely encounter malicious attacks. In light of this, we have designed an intelligent aquaculture system that considers information security, thereby realizing a safe IoT-based aquaculture system. In other words, artificial intelligence and IoT technology have been integrated into a research project regarding the framework of an intelligent and security-enabled IoT system for the aquaculture industry. Design and Implementation of Wearable Intelligent Glasses and Its Cloud-based Management Platform for Vehicle Driver Safety (National Wearable Devices Project Program, MoST funded) 08/2017-07/2018, Southern Taiwan University of Science and Technology, Tainan, Taiwan. This research project, namely the application of development of smart glass for safety of driving, and development of a cloud management platform (CMP), is proposed to finish in one year. This work mainly focuses on upgrading the existing smart glass with the fatigue alarm system. The glass with commercial grade, is offered by Jorjin Technologies Inc. The cooperation of four sub projects will assist to complete this work. Sub projects 1 is to put the band pass type infrared sensor into practice. We plan to utilize GaAs to produce band pass type infrared sensor, which enhances the sensitivity and the accuracy of signal detection. Sub projects 2 is to develop integrated circuit with sensors. We integrate circuit with sensors, D/A converter chip, low power micro-controller, and wireless transmission chip by using Through-Silicon. Via (TSV) technology of National Nano Device Laboratories (NDL). The designs of firmware and driver will be proposed in Sub projects 3 in order to transform the existing skill of smart glass to platform of Jorjin Technologies Inc., The CMP, mentioned in Sub projects 4, is to implement remote management and analysis on cloud platform. Design and Implementation of Next-Generation IOV Communication Systems (National Project Program, MoST funded) 10/2016-07/2019, Southern Taiwan University of Science and Technology, Tainan, Taiwan. A three-year term project is proposed to design and implement next-generation IOV communication systems which integrate visible light communication (VLC) and power line communication (PLC) technologies. The proposed project targets will be achieved by executing the four subprojects, namely, Subproject I: Design and implementation of vehicle information cloud service platform, Subproject II: Research and implementation of power line in-vehicle communication systems, Subproject III: Design and implementation of vehicle gateway of heterogeneous network, and Subproject IV: Design and implementation of lighting and visible light communication modules for vehicle-to-vehicle data transmission. Factory Renovation Project for BXB Electronics Co., Ltd. 05/2016-08/2016, Cooperation: BXB Electronics Co., Ltd., Kaohsiung, Taiwan Development of Wireless Multimedia Multicast and Real-time Streaming Communication Technique (Industry and Academia Cooperation Project, Under Contract No. T104004) 04/2015-08/2016, Cooperation: BXB Electronics Co., Ltd., Kaohsiung, Taiwan & Wireless Broadband Communication Protocol Cross-Campus Research Center, National Sun Yat-Sen University, Kaohsiung, Taiwan. Development of Intelligent Speaker Tracking System and Lip-based Voice Controlled Microphone Algorithm (Industry and Academia Cooperation Project, Under Contract No. T103007) 04/2014-12/2014, Cooperation: BXB Electronics Co., Ltd., Kaohsiung, Taiwan & Wireless Broadband Communication Protocol Cross-Campus Research Center, National Sun Yat-Sen University, Kaohsiung, Taiwan. Development of LED-based Visible Light Communications (VLCs) Techniques for Wireless Digital Conference Systems (Industry Project, Small Business Innovation Research (SBIR) Program funded (Under Contracts No. 1Z1021797 and No. E10200008345-233), Department of Industrial Technology (DoIT), Ministry of Economic Affairs (MOEA), Taiwan, R.O.C.) 11/2013-10/2014, Cooperation: BXB Electronics Co., Ltd., Kaohsiung, and Information & Communications Research Laboratories, Industrial Technology Research Institute (ITRI), Hsinchu, Taiwan. Developed LED-based Visible Light Communications (VLCs) Techniques for Wireless Digital Conference Systems. Development of WiMAX-based Wireless Public Address Broadcasting System (Industry Project, Kaohsiung-Location Small Business Innovation Research (Kaohsiung-SBIR) Program funded (Under Contract No. SBIR10258), Kaohsiung City Government, Taiwan, R.O.C.) 09/2013-08/2014, Cooperation: BXB Electronics Co., Ltd., Kaohsiung, Taiwan, Wireless Broadband Communication Protocol Cross-Campus Research Center, National Sun Yat-Sen University, Kaohsiung, Taiwan, and Information & Communications Research Laboratories, Industrial Technology Research Institute (ITRI), Hsinchu, Taiwan. Developed a WiMAX-based Wireless Public Address Broadcasting System Development of Networked Transmission and Control Techniques for Peacetime/Emergency Public Address Broadcasting System (Industry Project, Kaohsiung-Location Small Business Innovation Research (Kaohsiung-SBIR) Program funded (Under Contract No. SBIR10160), Kaohsiung City Government, Taiwan, R.O.C.) 10/2012-09/2013, Cooperation: BXB Electronics Co., Ltd., Kaohsiung, Taiwan & Information and Communications Research Laboratories, Industrial Technology Research Institute (ITRI), Hsinchu, Taiwan. Developed Graphical Networked Digital Control System for peacetime/emergency public address broadcasting system, which is supported VoIP, Text-to-Speech (TTS) and Partition Broadcast, etc. Development of Fully Digital Audio Signal Processing and Long Distance Transmission for Digital Conference Systems (Industry Project, Small Business Innovation Research (SBIR) Program funded (Under Contracts No. 1Z1010480 and No. E10100005298-204), Department of Industrial Technology (DoIT), Ministry of Economic Affairs (MOEA), Taiwan, R.O.C.) 06/2012-02/2013, BXB Electronics Co., Ltd., Kaohsiung, Taiwan. Developed the fully digital audio signal processing and long distance transmission for digital conference systems. A Unified Power Management Mechanism for Energy-Aware Low-Power Multimedia Mobile Devices (PhD Summer Program Co-Funded, Interchange Association of Japan (IAJ) & NSC, Taiwan, R.O.C.) 2010, Togawa Lab, Department of Computer Science and Engineering, Waseda University, Tokyo, Japan, supervised by Professor Nozumu Togawa and Professor Youhua Shi Developed a unified power management methodology for energy-aware multimedia mobile devices. An Integrated Analysis Methodology for 3DG Mapping Software Applications onto Power-Aware Mobile Devices (NSC Graduate Student Study Abroad Program (GSSAP) funded, Taiwan, R.O.C.) 2008-2009, Center for Embedded Computer Systems (CECS), Department of Computer Science, University of California at Irvine, CA, U.S.A., supervised by Professor Nikil Dutt (IEEE/ACM Fellow). Developed a power analysis technique towards Power-aware mobile for mapping software application such as graphics-intensive 3D games. Hardware-assisted Power Management of Embedded Systems (National University of Singapore (NUS) funded, Singapore; NSC NSoC program funded, Taiwan, R.O.C.) 2008. Cooperation: Department of Computer Science and Engineering, School of Computing, National University of Singapore & Department of Computer Science and Engineering, National Sun Yat-Sen University. Integration of software information and hardware features for interactive 3D game power management Development of an Energy-aware Mobile 3D Graphics SoC with Real-time Performance/Energy Monitoring and Control (NSC NSOC program funded, Taiwan, R.O.C.) 2007-2010, Department of Computer Science and Engineering, National Sun Yat-Sen University Developed an energy-aware mobile 3D graphics SoC with Real-time Performance/Energy Monitoring and Control. A Real-time Power Analysis Platform for Embedded System Developments (NSC funded, Taiwan, R.O.C.) 2006-2008, Department of Computer Science and Engineering, National Sun Yat-Sen University Designed and developed a real-time power analysis platform for embedded system development on the PreSOC embedded systems development board with S4510, S2140 ARM-like processor, or Intel Xscale Processor. Embedded In-circuit Emulator SW/HW Development (Industry project) 09/2006 -09/2007, Department of Computer Science and Engineering, National Sun Yat-Sen University Developed an ARM7-like Embedded In-circuit emulator (ICE) SW/HW techniques for Himax Inc., Tainan, Taiwan and SoC design Center at National Chung-Cheng University, Chayi, Taiwan. Dynamic PCM Codec design (3C Integration plan, Ministry of Education, Taiwan, R.O.C.) 2001-2002, Graduate Institute of Electronic and Information Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan Developed a dynamic PCM codec and its IP generator for Non-deterministic Environments. Mobile Descriptions (Industry project) 2002, Graduate Institute of Electronic and Information Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan Integrated all board-level digital circuits about mobile descriptions into a CPLD chip for Upgradeware Technologies Inc. A Systolic-based Squarer Design (Undergraduate project) 2000, Department of Electronic Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan Designed an efficient and low power systolic squarer. A Retargetable Microcontroller Soft-IP Generator (Undergraduate project, NSC Fund, Taiwan) 1999-2000, Department of Electronic Engineering, National Kaohsiung University of Applied Sciences, Kaohsiung, Taiwan. Designed and developed a retargetable soft-IP generator, which can be generated RTL code according to the MC8051 assembly code. Calibration Control System of 2-Axles Servo Motor (Undergraduate Project) 1998-1999, Department of Electronic Engineering, Southern Taiwan University of Technology, Tainan, Taiwan. Designed and developed a 2-Axles Calibration Control System by using AC Servo Motor.
|
|
|
|
|
|
Invited Services for International Society Treasurer, IEEE Young Professionals Tainan Chapter, Since 2023~ Chair of Internet of Things, Internet of Everywhere and Edge Computing (IOT) Technical Committee, IEEE Consumer Technology Society, Since 2022~ Member of Future Direction Committee, IEEE Consumer Technology Society, Since 2023~ Member of Internet of Things, Internet of Everywhere and Edge Computing (IOT) Technical Committee, IEEE Consumer Technology Society, Since 2021~ Affiliate Member of Audio and Acoustic Signal Processing Technical Committee, IEEE Signal Processing Society, Since 2012~ Affiliate Member of Design and Implementation of Signal Processing Systems Technical Committee, IEEE Signal Processing Society, Since 2012~ Affiliate Member of Industry DSP Technology Standing Technical Committee, IEEE Signal Processing Society, Since 2012~ Review for the revised IEEE Consumer Electronics Society Constitution, 2009. Review for the revised IEEE Education Society Constitution, 2009. Review Grant Application being Filed with the U.S. Federal Government by Applicants Seeking Financial Support for Board Projects, Since 2009~ Projects Review for the 2013 IBM/IEEE Smarter Planet Challenge Student Competition, IEEE Educational Activities, NJ, U.S.A., Dec. 2013. Review OSF Electronic Proposal for National Science Centre Poland, Since Sep. 2016~ Invited Services for International Journal International Journal of Engineering Education (IJEE) (SCI-Indexed Journal), Special Issue on Applications of Engineering Education Research (IJEE-AEER-09): Member of Programme Committee. Invited Services for International Conference IEEE International Conference on Gaming, Entertainment & Media (IEEE GEM 2025), Kaohsiung, Taiwan, 2025: Chair of Technical Program Committee (TPC) IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2025), Kaohsiung, Taiwan, 2025: Chair of Technical Program Committee (TPC) IEEE 43rd International Conference on Consumer Electronics (IEEE ICCE 2025), Las Vegas, NV, USA, 2025: Special Session Chair: Emerging Advanced Technologies and Applications for Intelligent Life and Smart City/Township. IEEE/IEIE International Conference on Consumer Electronics – Asia (ICCE-Asia), Danang, Vietnam, 2024: Special Session Chair of Organizing Committee. IEEE Global Conference on Consumer Electronics (IEEE GCCE 2024), Kokura, Japan, 2024: Chair for Organized Session SCL (Emerging Advanced Technologies for Smart City/Township and Intelligent Logistics) ACM 6th International Electronics Communication Conference (ACM IECC 2024), Fukuoka, Japan, 2024: Program Co-Chairs ACM 6th International Electronics Communication Conference (ACM IECC 2024), Fukuoka, Japan, 2024: International Technical Program Committees (ITPC) IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2024), Taichung, Taiwan, 2024: Special Session Chair for Emerging Advanced Technologies for Smart City and Intelligent Transportation. IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2024), Taichung, Taiwan, 2024: Member of Technical Program Committee (TPC) IEEE 6th International Conference on Computer Communication and the Internet (IEEE ICCCI 2024), Tokyo, Japan, 2024: Member of Technical Program Committee (TPC) IEEE 6th International Conference on Computer Communication and the Internet (IEEE ICCCI 2024), Tokyo, Japan, 2024: Special Session I Chair: Innovative Information & Communication Technologies and Its Applications. IEEE International Conference on Gaming, Entertainment & Media (IEEE GEM 2024), Turin, Italy, 2024: Member of Technical Program Committee (TPC) IEEE 12th International Conference on Information and Education Technology (IEEE ICIET 2024), Yamaguchi, Japan, 2024. Oral Session 2 Chair: Digital Teaching and IOT for Education Applications. IEEE 42nd International Conference on Consumer Electronics (IEEE ICCE 2024), Las Vegas, NV, USA, 2024: Special Session Chair: Emerging Advanced Technologies and Applications for Intelligent Life and Smart City/Township (SS-02). IEEE International Automatic Control Conference (IEEE CACS 2023), Penghu, Taiwan, 2023: Exhibition Chair. IEEE International Conference on Fuzzy Theory and Its Applications (IEEE iFUZZY 2023), Penghu, Taiwan, 2023: Exhibition Chair. IET International Conference on Engineering Technologies and Application (IET ICETA 2023), Yulin, Taiwan, 2023: Special Session Chair for Computational Intelligence Systems and Applications. IEEE Global Conference on Consumer Electronics (IEEE GCCE 2023), Nara, Japan, 2023 Chair for Organized Session SCL (Emerging Advanced Technologies for Smart City/Township and Intelligent Logistics) IEEE Global Conference on Consumer Electronics (IEEE GCCE 2023), Nara, Japan, 2023: Member of Technical Program Committee (TPC) IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2023), Pingtung, Taiwan, 2023: Special Session Chair for Emerging Advanced Technologies for Smart City and Intelligent Transportation. IEEE 5th International Conference on Computer Communication and the Internet (IEEE ICCCI 2023), Fujisawa, Japan, 2023: Special Session I Chair: Innovative Information & Communication Technologies and Its Applications. IEEE 41st International Conference on Consumer Electronics (IEEE ICCE 2023), Las Vegas, Nevada, USA, 2023: Chair for Track CT07 (Internet of Things and Internet of Everywhere and Edge Computing (IoT)) IEEE 41st International Conference on Consumer Electronics (IEEE ICCE 2023), Las Vegas, Nevada, USA, 2023: Member of Technical Program Committee (TPC) IEEE Global Conference on Consumer Electronics (IEEE GCCE 2022), Osaka, Japan, 2022: Chair for Organized Session SCL (Emerging Advanced Technologies for Smart City/Township and Intelligent Logistics) IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2022), Taipei, Taiwan, 2022: Special Session Chair for Emerging Advanced Technologies for Smart City and Intelligent Transportation. IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2022), Taipei, Taiwan, 2022: Member of Technical Program Committee (TPC) IEEE Global Conference on Life Sciences and Technology, (IEEE LifeTech 2022), Osaka, Japan, 2022: Chair for Organized Session OS-ILT (Artificial Intelligence and Internet of Things Technologies for Intelligent Life and Transportation) IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2021), Penghu, Taiwan, 2021: Session Chair for F7 (Internet of Things and Internet of Everywhere and Edge Computing (IoT)) IEEE International Conference on Consumer Electronics – Taiwan (IEEE ICCE-TW 2021), Penghu, Taiwan, 2021: Member of Technical Program Committee (TPC) IEEE 39th International Conference on Consumer Electronics (IEEE ICCE 2021), Las Vegas, Nevada, USA, 2021: Co-Chair for Track CT02 (Internet of Things and Internet of Everywhere and Edge Computing (IoT)) IEEE 39th International Conference on Consumer Electronics (IEEE ICCE 2021), Las Vegas, Nevada, USA, 2021: Member of Technical Program Committee (TPC) IEEE International Conference on Computer Application & Information Security (ICCAIS 2020), Riyadh, Saudi Arabia, 2020: Member of Technical Program Committee (TPC) 18th International Symposium on Advanced Technology (ISAT-18), Tainan, Taiwan: Poster Session Chair 18th International Symposium on Advanced Technology (ISAT-18), Tainan, Taiwan: Member of Organizing Committee 18th International Symposium on Advanced Technology (ISAT-18), Tainan, Taiwan: Member of Secretariat ISTA Workshop on Computational Intelligence Systems and Applications (CISA-2019), Trivandrum, Kerala, India, 2019: Member of Technical Program Committee (TPC) IEEE 2019 Fifth International Conference on Image Information Processing (ICIIP -2019), Himachal Pradesh, India, 2019: Member of Technical Program Committee (TPC) IEEE 2019 2nd International Conference on Computer Applications & Information Security (ICCAIS), Riyadh, Saudi Arabia, 2019: Member of Technical Program Committee (TPC) IEEE 88th Vehicular Technology Conference-Fall (VTC2018-Fall), Chicago, USA, 2018: Member of Technical Program Committee (TPC) for Track 5. Radio Access Technology and Heterogeneous Networks IEEE 7th International Conference on Advance in Computing, Communications and Informatics (ICACCI’18), Bangalore, India, 2018: Member of Technical Program Committee (TPC) IEEE International Conference on Control, Electronics, Renewable Energy, and Communications 2018 (ICCEREC 2018), Bandung, Indonesia, 2018: Member of Technical Program Committee (TPC) IEEE World Symposium on Computer Applications & Research (WSCAR’18), Turkey, 2018: Member of Technical Program Committee (TPC) IEEE 4th International Conference on Computer and Technology Applications (ICCTA’18), Istanbul, Turkey, 2018: Member of Technical Program Committee (TPC) IEEE International Symposium on Emerging Topics in Circuits and Systems, India, 2017: Member of Technical Program Committee (TPC) IEEE 6th International Conference on Advance in Computing, Communications and Informatics (ICACCI’17), Karnataka, India, 2017: Member of Technical Program Committee (TPC) IEEE World Symposium on Computer Applications & Research (WSCAR’17), Turkey, 2017: Member of Technical Program Committee (TPC) IEEE International Conference on Connected Vehicles & Expo (ICCVE’16), Seattle, WA, USA, 2016: Member of Technical Program Committee (TPC) IEEE International Symposium on Consumer Electronics (ISCE’16), Sao Paulo, Brazil, 2016: Member of Technical Program Committee (TPC). IEEE Joint 8th International Conference on Soft Computing and Intelligent Systems and 17th International Symposium on Advanced Intelligent Systems (SCIS-ISIS’16), Sapporo, Hokkaido, Japan: Member of Technical Program Committee (TPC) IEEE Global Summit on Computer & Information Technology (GSCIT’16), Sousse, Tunisia, 2016: Member of Technical Program Committee (TPC) International Conference on Architectural Research & Computer-Aided Design (ICARCAD’16), Rome, Italy, 2016: Member of Technical Program Committee (TPC) IEEE International Conference on Connected Vehicles & Expo (ICCVE’15), Shenzhen, China, 2015: Member of Technical Program Committee (TPC) IEEE International Symposium on Consumer Electronics (ISCE’15), Madrid, Spain, 2014: Member of Technical Program Committee (TPC). International Conference on e-Quality & e-Service Sciences (eQeSS), Dubai, UAE, 2015: Member of Technical Program Committee (TPC) International Bio-Metrics & Smart Government Summit (IBMGSG’15), Sousse, Tunisia, 2015: Member of Technical Program Committee (TPC) International Conference on Computer Applications & Aided Diagnosis (ICCAAD’14), Algeria, 2014: Member of Technical Program Committee (TPC) IEEE International Conference on Connected Vehicles & Expo (ICCVE’14), Vienna, Austria, 2014: Member of Technical Program Committee (TPC) IEEE International Symposium on Consumer Electronics (ISCE’14), Jeju, Korea, 2014: Member of Technical Program Committee (TPC). IEEE Global High Tech Congress on Electronics (GHTCE’13), Shenzhen, China, 2013: Session Chair. IEEE International Conference on Connected Vehicles & Expo (ICCVE’13), Las Vegas, U.S.A., 2013: Member of Technical Program Committee (TPC) IEEE International Symposium on Consumer Electronics (ISCE’13), Hsinchu, Taiwan, 2013: Member of Technical Program Committee (TPC). IEEE International Symposium on Consumer Electronics (ISCE’12), Harrisburg, Pennsylvania, U.S.A., 2012: Member of Technical Program Committee (TPC). IEEE The 2012 Joint 6th International Conference on Soft Computing and Intelligent Systems (SCIS) and 13th International Symposium on Advanced Intelligent Systems (ISIS), Kobe, Japan, 2012: Member of International Program Committee (IPC). IEEE International Symposium on Consumer Electronics (ISCE’10), Braunschweig, Germany, 2010: Member of Technical Program Committee (TPC). IEEE International Symposium on Consumer Electronics (ISCE’09), Kyoto, Japan, 2009: Member of Technical Program Committee (TPC). International Invited Talks Title: “Problem/Project/Product-Based Learning (3PBL) Skills Applied to Practical Projects Course for Undergraduate Students,” The Young Professionals Event, 2025 IEEE 43rd International Conference on Consumer Electronics (ICCE), Las Vegas, USA, Jan. 2025. Title: “The Development of an Energy-awared Mobile 3D graphics SoC with Real-time Performance/energy Monitoring and Control”, 2008 IEEE International SoC Design Conference (ISOCC’08), Busan, Korea, Nov. 2008. Domestic Invited Talks Title: “Problem/Project/Product-Based Learning (3PBL) Skills Applied to Practical Projects Course for CSIE@NPU Undergraduate Students,” Department of Intelligent Commerce, National Kaohsiung University of Science and Technology, Kaohsiung, Taiwan, 18 Oct. 2024. Title: “Integration and Application of Hardware/Software Techniques: Embedded Systems”, Workshop on Embedded Systems Techniques, Dept. Computer Science and Information Engineering, Tajen University, Pingtung, Taiwan, R.O.C., 06 Jan. 2010. Title: “Making of the Digital Teaching Materials”, College of Engineering, National Sun Yat-Sen University, Kaohsiung, Taiwan, R.O.C., 16 Oct. 2009. Title: “Recent Embedded Systems Development and Research”, Dept. of Information Technology, National Ping Tung Institute of Commerce, Ping Tung, Taiwan, R.O.C., 22 Jun. 2007. Title: “Introduction to Embedded Systems”, Dept. of Information Management, I-Shou University, Kaohsiung, Taiwan, R.O.C., 08 Dec. 2005. Title: “The Concept of the Oriented-Object Programming (OOP) applied to IC Design”, Dept. of Information Management, I-Shou University, Kaohsiung, Taiwan, R.O.C., 17 Nov. 2004. Training Courses Speaker (Lecturer) “2019 Summer AI Practice Short Course,” Teaching for Indonesia Banyuwangi State Polytechnic Visiting Teachers, Southern Taiwan University of Science and Technology, Tainan, Taiwan, R.O.C. Aug. 21-22, 2019. “Embedded In-circuit Emulator SW/HW development techniques”, Training for graduate students and engineers of SoC design Center at National Chung-Cheng University, Chayi, Taiwan, R.O.C. Nov-Dec. 2007. “Embedded In-circuit Emulator SW/HW development techniques”, Training for Engineers of Himax Inc., Tainan, Taiwan, R.O.C. Sept. 2007. Journal Editor/Guest Editor Associate Editor for the IEEE Transactions on Consumer Electronics (ISSN 0098-3063), Since 2024~ Associate Editor for the IEEE Sensors Journal (ISSN 1558-1748), Since 2024~ Associate Editor for the IEEE Access (ISSN 2169-3536), Since 2019~ Associate Editor for the IEEE Technology and Engineering Education (ISSN 1558-7908), Since 2014~ Section Editor for the IEEE Technology and Engineering Education (ISSN 1558-7908), Since 2013~ Guest Editor of Special Issue on Power/Performance Analysis for Embedded Mobile Applications and Devices for the Energies (ISSN 1996-1073), Since 2020~ Guest Editor-in-Chief of Special Issue on Intelligent Electronics Education for the IEEE Technology and Engineering Education (ISSN 1558-7908), to be published on Sep./Dec. 2014. Proposal/Technical Reports Reviewer PhD/Master Thesis Awards, Wen-Jen Shen Memorial Awards, Taiwan IC Design Society, Taiwan, R.O.C. Annual Outstanding Paper Awards, Wen-Jen Shen Memorial Awards, Taiwan IC Design Society, Taiwan Excellent Research Awards, technical report of NSC undergraduate student project, NSC, Taiwan, R.O.C. General-Style Research Proposal, NSC, Taiwan, R.O.C. First report of System Software Division, National Embedded Systems Design Contest, Ministry of Education, Taiwan, R.O.C. First report of Hardware/Software Integration Division, National Embedded Systems Design Contest, Ministry of Education, Taiwan, R.O.C. First report of Open Source Software Division, National Embedded Systems Design Contest, Ministry of Education, Taiwan, R.O.C. First report, National IC/CAD Contest, Ministry of Education, Taiwan, R.O.C. Journal Papers Reviewer ACM Transactions on Computing for Healthcare (HEALTH), Since 2023~ ACM Transactions on Design Automation of Electronic Systems (TODAES), Since 2007~ ACM Transactions on Internet of Things (TIOT), Since 2024~ ACM Transactions on Sensor Networks (TOSN), Since 2022~ Elsevier Accident Analysis and Prevention, Since 2019~ Elsevier Embedded Hardware Design (Microprocessors and Microsystems), Since 2014~ Elsevier Internet of Things (IoT), Since 2020~ Elsevier Journal of King Saud University - Computer and Information Sciences, Since 2018~ Eurasia Journal of Mathematics, Science and Technology Education, Since 2017~ IEEE Access, Since 2017~ IEEE Canadian Journal of Electrical and Computer Engineering (ICJECE), Since 2023~ IEEE Communications Letters (ICL), Since 2013~ IEEE Communications Magazine (Commag), Since 2023~ IEEE Consumer Electronics Magazine (CEMag), Since 2017~ IEEE Engineering Management Review (EMR), Since 2024~ IEEE Embedded Systems Letters (ESL), Since 2022~ IEEE Internet of Things Journal (IoT-J), Since 2019~ IEEE Internet of Things Magazine (IoT-Mag), Since 2023~ IEEE Journal of Biomedical and Health Informatics (JBHI), Since 2022~ IEEE Network Magazine, Since 2022~ IEEE Potentials, Since 2023~ IEEE Sensors Journal (SENJ), Since 2019~ IEEE Sensors Letters (SENL), Since 2023~ IEEE Systems Journal (ISJ), Since 2014~ IEEE Systems, Man, and Cybernetics Magazine (SMC Magazine), Since 2022~ IEEE Technology and Engineering Education (ITEE), Since 2013~ IEEE Transactions on AgriFood Electronics (TAFE), Since 2023~ IEEE Transactions on Artificial Intelligence (TAI), Since 2023~ IEEE Transactions on Big Data (TBD), Since 2022~ IEEE Transactions on Circuits and Systems II: Express Briefs (TCAS-II), Since 2017~ IEEE Transactions on Computer Aided Design of Integrated Circuits and Systems (TCAD), Since 2011~ IEEE Transactions on Consumer Electronics (TCE), Since 2022~ IEEE Transactions on Education (TE), Since 2006~ IEEE Transactions on Emerging Topics in Computational Intelligence (TETCI), Since 2023~ IEEE Transactions on Engineering Management (TEM), Since 2022~ IEEE Transactions on Industrial Informatics (TII), Since 2022~ IEEE Transactions on Instrument and Measurement (TIM), Since 2020~ IEEE Transactions on Intelligent Transportation Systems (TITS), Since 2023~ IEEE Transactions on Intelligent Vehicles (TIV), Since 2024~ IEEE Transactions on Smart Grid (TSG), Since 2019~ IEEE Transactions on Sustainable Computing (TSUSC), Since 2022~ IEEE Transactions on Transportation Electrification (TTE), Since 2023~ IEEE/CAA Journal of Automatica Sinica, Since 2024~ IET Electronics Letters, Since 2022~ IET Image Processing, Since 2022~ IET Wireless Sensor Systems, Since 2024~ IIIS Journal of Education, Informatics and Cybernetics (JEIC), Since 2009~ IIIS Journal of Systems, Cybernetics, and Informatics (JSCI), Since 2015~ International Journal of Communication Systems (IJCS), Since 2016~ International Journal of Engineering Education (IJEE), Since 2009~ Journal of Circuits, Systems and Computers (JCSC), Since 2015~ MDPI Applied Sciences, Since 2019~ MDPI Big Data and Cognitive Computing, Since 2019~ MDPI Biosensors, Since 2019~ MDPI Computers, Since 2017~ MDPI Data, Since 2018~ MDPI Education Sciences, Since 2018~ MDPI Electronics, Since 2018~ MDPI Energies, Since 2018~ MDPI Future Internet, Since 2018~ MDPI Information, Since 2019~ MDPI International Journal of Environmental Research and Public Health, Since 2019~ MDPI Sensors, Since 2018~ MDPI Sustainability, Since 2018~ MDPI Symmetry, Since 2018~ MDPI Technologies, Since 2019~ Conference Papers Reviewer 18th International Symposium on Advanced Technology (ISAT-18) ACM/IEEE Design Automation Conference (DAC) IEEE Global Conference on Consumer Electronics (GCCE) IEEE Global Conference on Life Sciences and Technologies (LifeTech) IEEE Global Summit on Computer & Information Technology (GSCIT) IEEE International Circuits and Systems Symposium (ICSyS) IEEE International Conference on Computer Science, Information Technology and Electrical Engineering (ICOMITEE) IEEE International Conference on Consumer Electronics (ICCE) IEEE International Conference on Consumer Electronics-Berlin (ICCE-Berlin) IEEE International Conference on Consumer Electronics-Taiwan (ICCE-TW) IEEE International Conference on Control, Systems & Industrial Informatics (ICCSII) IEEE International Conference on Electronic Design (ICED) IEEE International Conference on Electronics Design, Systems and Applications (ICEDSA) IEEE International Conference on Gaming, Entertainment & Media (GEM) IEEE International Conference on Instrumentation Control and Automation (ICA) IEEE International Conference on Nanocomposite and Engineering (ICNC) IEEE International Conference on Soft Computing and Intelligent Systems (SCIS) IEEE International E-Learning Conference: Cognitively Informed Technology (IeLC) IEEE International Symposium on Advanced Intelligent Systems (ISIS) IEEE International Symposium on Circuits and Systems (ISCAS) IEEE International Symposium on Consumer Electronics (ISCE) IEEE International Symposium on Consumer Technologies (ISCT) IEEE International Symposium on Emerging Topics in Circuits and Systems (ISETCS) IEEE International Symposium on VLSI Design, Automation, and Test (VLSI-DAT) IEEE Sensors IEEE Symposium on Industrial Electronics & Applications (ISIEA) IEEE World Symposium on Computer Applications & Reseacrch (WSCAR) IEEE/ACM Asia and South Pacific Conference Design Automation Conference (ASP-DAC) IEEE/SAE International Conference on Connected Vehicles & Expo (ICCVE) IFIP/IEEE International Conference on Embedded and Ubiquitous Computing (EUC) International Bio-Metrics & Smart Government Summit (IBMSGS) International Computer Symposium (ICS) International Conference on Computer Applications & Aided Diagnosis (ICCAAD) International Conference on Education and Information Systems, Technologies and Application (EISTA) International Conference on e-Quality & e-Service Sciences (eQeSS) International Conference on Society and Information Technologies (ICSIT) International Multi-Conference on Complexity, Informatics and Cybernetics (IMCIC) International Symposium on Design and Research in Artificial and Natural Sciences (DRANS) VLSI Design/CAD Symposium (VLSI/CAD) Workshop on Synthesis and System Integration of Mixed Information Technology (SASIMI) |
|
|
|
|
|
International Journal Papers (51 Accepted/Published Papers)
* denotes the Corresponding Author Domestic Journal Papers (8 Accepted/Published Papers)
International Conference Papers (125 Accepted/Published Papers)
* denotes the Corresponding Author Domestic Conference Papers (23 Accepted/Published Papers)
|
|
|
|
|
|
U.S. Patents
Taiwan Patents
China Patents
|
|
|
|
|
|
Approaches to Objects Detection using DIGITS Deep Learning for Image Segmentation, Nvidia Deep Learning Institute, Tainan, Taiwan (1 Full-Day, Sep. 2017) Project Management Professional (PMP) Preparation Training Course (42-Hour), National Chung Cheng University, Kaohsiung, Taiwan (Mar. 2015-May 2015) Creative Management, MBA Course (18-Week), College of Management, National Sun Yat-Sen University, Kaohsiung, Taiwan (Sep. 2013-Jan. 2014) Market-Leading Enterprise Innovation Strategy, ITRI Course, Taiwan. (3 Full-Days, Aug. 2013) Effective Communications & Human Relations, Dale Carnegie Training, Kaohsiung, Taiwan (Jul. 2013 - Sep. 2013) Industry Competitive Analysis Methodologies and its Applications, ITRI Course, Taiwan (1 Full-Day, Jul. 2014) |
|
|
|
|
|
Guest Researchers Wen-Hsien Huang (黃文賢), Innolux Corporation, Tainan, Taiwan, Nov. 2024 ~ Visiting Doctoral Student Advisees Wei-Chien Wang (王薇茜), Dept. of Computer Science, Faculty of Engineering and Information Technologies, The University of Sydney, Sydney, Australia, Co-Advised with Prof. Dagan Feng and Prof. Jinman Kim, Nov. 2021 – Aug. 2022.
Doctoral Student Advisees
Graduate Student Advisees
Undergraduate Student Research Project Advisees Graduated in 2025
Graduated in 2024
Graduated in 2023
Graduated in 2022
Graduated in 2021
|
|
|
|
|
|
ICDL 2.0 IT Security (Sep. 2020) ICDL Computing 1.0 Python (Sep. 2020) ICDL Presentation 6.0 MS PowerPoint 2016 (Sep. 2020) ICDL Spreadsheet 6.0 Excel 2016 (Sep. 2020) ICDL Word Processing 6.0 MS Word 2016 (Sep. 2020) ICDL Digital Marketing 1.0 (Sep. 2020) Advanced HDBaseT Installer Expert Certificate, HDBase T Installer Expert Training Program, HDBase T Alliance. (Apr. 2015) Expert Level, English Vocabulary Quotient in ICT, Professional Vocabulary Quotient Credential, Global Learning & Assessment Development (GLAD), CA, U.S.A. (Dec. 2013) Foreign Language (English) Tutor Manager, the Examination Yuan (考試院), Taiwan, R.O.C. (May 2012) Certificate of University Associate Professor, Ministry of Education, Taiwan, R.O.C. (Feb. 2024) Certificate of University Assistant Professor, Ministry of Education, Taiwan, R.O.C. (Nov. 2020) Certificate of University Lecturer, Ministry of Education, Taiwan, R.O.C. (Jan. 2008) Information Division, Certificate of High School Teacher, Ministry of Education, Taiwan, R.O.C. (Jul. 2004) Computer Division, Certificate of High School Teacher, Ministry of Education, Taiwan, R.O.C. (Jul. 2004) Electronics Division, Certificate of High School Teacher, Ministry of Education, Taiwan, R.O.C. (Jul. 2004) Consumer Electronics, Class A (Top-level Certificate, less than 150 people in Taiwan), Certificate of Technician, Taiwan, R.O.C. (Aug. 2003) Consumer Electronics, Class B, Certificate of Technician, Taiwan, R.O.C. (May. 2000) Instrument Electronics, Class B, Certificate of Technician, Taiwan, R.O.C. (Feb. 2000)
Computer Software Application, Class B, Certificate of Technician, Taiwan, R.O.C. (Feb. 2012) |
|
|
|
|
|
English (Good), Chinese (Native), Taiwanese (Native), Japanese (Basic) |
|
Associate Professor & Chair, Department of Computer Science and Information Engineering & Director (資工系副教授 兼任 系主任)